|
| Home RSS Directory F.A.Q Suggest A Feed Try Custom Feed Sonneries Portable |
Latest Flows from this sub-category: random selection from this sub-category: |
 Cactus Tactical Sat, 26 Jul 2008 04:43:14 +0200
Nordic Components - extended magazine tubes for Browning Gold shotguns
These are the finest machined shotshell tube extensions currently available. Each tube has a unique swirl style barrel nut (image on left) adding a distinctive touch while also providing a quick and sure grip.
Currently available in +3, +4 and +5 configurations for the Browning Gold shotguns. Shell capacity is defined by Nordic as the shell increase above the standard capacity provided by the fixed magazine tube (tube inside the forearm). If your shotgun currently has a short tube extension that extends past the fixed magazine tube, the round capacity of that extension would be lost as it is removed and replaced. Magazine tube length is the length of the tube and nut. Overall length of the tube extensions (including the nut): +3 - 8 1/4 inches +4 - 10 inches +5 - 11 5/8 inches Using the tube overall length provided above, please determine the complete installed length of your shotguns fixed tube and the tube extension. Once this is done, it should be apparent that some tubes will extend past the end of your barrel when installed. That is a perfectly viable option for shotgun use, it is your personal choice as to whether tube extends past the barrel. Please decide before you buy as to whether it is acceptable to you for a tube to extend past the barrel. An extended spring is included with the magazine extension tube. Followers, clamp, clamp rail and speed bolt handle in the image below are for display purposes only and are not included with the magazine extension. These items can be purchased separately. 
Sat, 26 Jul 2008 04:43:14 +0200
Nordic Components - extended magazine tubes for Winchester SX2 and SX3 shotguns
These are the finest machined shotshell tube extensions currently available. Each tube has a unique swirl style barrel nut (image on left) adding a distinctive touch while also providing a quick and sure grip.
Currently available in +3, +4 and +5 configurations for the Winchester SX2 and SX3 shotguns. Shell capacity is defined by Nordic as the shell increase above the standard capacity provided by the fixed magazine tube (tube inside the forearm). If your shotgun currently has a short tube extension that extends past the fixed magazine tube, the round capacity of that extension would be lost as it is removed and replaced. Magazine tube length is the length of the tube and nut. Overall length of the tube extensions (including the nut): +3 - 8 1/4 inches +4 - 10 inches +5 - 11 5/8 inches Using the tube overall length provided above, please determine the complete installed length of your shotguns fixed tube and the tube extension. Once this is done, it should be apparent that some tubes will extend past the end of your barrel when installed. That is a perfectly viable option for shotgun use, it is your personal choice as to whether tube extends past the barrel. Please decide before you buy as to whether it is acceptable to you for a tube to extend past the barrel. An extended spring is included with the magazine extension tube. Followers, clamp, clamp rail and speed bolt handle in the image below are for display purposes only and are not included with the magazine extension. These items can be purchased separately.
Sat, 26 Jul 2008 04:43:14 +0200
The Polymer Magazine (PMAG) is a lightweight 5.56 NATO, M-16 compatible magazine. The PMAG features a pop-off storage/dust cover that alleviates pressure from the magazine feed lips, allowing for storage of loaded magazines without risk of feed lip creep that often causes malfunction in standard aluminum magazines. PMAG utilizes a resilient stainless steel spring for corrosion resistance.
The MagLevel PMAG features a window with a round count indicator. Features:
If you are unclear about the legality of buying high capacity magazines in your city or state, please click here for the current state and local restrictions. It is the buyers responsiblity to be aware and accountable for any purchase which could violate a local or state law.
Sat, 26 Jul 2008 04:43:14 +0200
You don't just get the gun, you get the gear too. Gun lock, two magazines and the Springfield firearm that you choose all nicely packed into a hard plastic gun case. The Springfield XD pistols are double action only with a 13 round mag capacity plus one in the chamber. Comes complete with fixed dovetail three dot sights and checkered polymer grips.
The new Springfield Armory XD .45 ACP Package. This package comes with 2 - 13 round magazines, polymer holster, speed loader and polymer double mag pouch. From the moment you pick it up you won't believe it's a 45 ACP, much less one that holds 14 rounds. Of course a polymer pistol of any caliber that feels this good in your hand could only be one thing: an XD. This time the Springfield engineers have outdone themselves, defying the laws of physics, adding material where needed, shaving it away where it's not ... cramming 14 rounds of 45 ACP punch into a polymer frame that is not perceptively larger than the one we use for the 9mm and 40 cal. XDs. Finally, it's here ... a 45 ACP XD that is true to the spirit of what the XD is all about ... an ergonomic wonder that is not just a gun that shoots, but a gun designed for YOU to shoot. This pistol cannot be shipped to CA, MA, NY & DC. Sat, 26 Jul 2008 04:43:14 +0200
After more than two years of research, development, and prototyping, SPEEDFEED has produced the best tactical shotgun stock / forearm ever! The pistol grip design now allows true one-hand control. Combined with the in stock magazine, the SPEEDFEED III Tactical Stock is the most versatile stock on the market today. Tthe SPEEDFEED I stock has two magazine tubes (storing a total of four rounds) molded into the stock. Each magazine tube (holding two shells) exits just behind the pistol grip, one on each side of the stock. A steel spring in each tube holds the rounds in the magazine until they're needed and then with a flick of the finger, shells are instantly available for loading. The set includes forend and recoil pad.
Speedfeed Part # 0255 - fits 12 gauge Mossberg 500 / 590 shotguns. Sat, 26 Jul 2008 04:43:14 +0200
The DPMS Upper Receiver Parts Kit contains the Forward Assist Assembly, Ejection Cover Assembly and the A2 Rear Sight Assembly.
Charging Handle is not included. Sat, 26 Jul 2008 04:43:14 +0200
The DPMS Carbon Fiber Free Float Tube is for a carbine length M4 / CAR-15 hanguard system.
This handguard is made of the same material as the Dodge Viper hood. It is very light weight, durable and helps dissipate heat better than a conventional free float tube. Sat, 26 Jul 2008 04:43:14 +0200
The DPMS Carbon Fiber Free Float Tube is for a standard length AR-15 hanguard system.
This handguard is made of the same material as the Dodge Viper hood. It is very light weight, durable and helps dissipate heat better than a conventional free float tube. Sat, 26 Jul 2008 04:43:14 +0200
DPMS Panther Arms Forged Lower Receiver Assembly
The DPMS Lower Receiver is forged from T6 Aircraft Aluminum Alloy and has a hardcoat anodized finish. Assembled AR-15 lower includes a 6 position collapsible stock and an A2 pistol grip. Description
Due to Federal firearms regulations, a Form 4473 or transfer to a receiving FFL is required for the purchase of this receiver. If you are unsure of the procedure, please click here for more information. Sat, 26 Jul 2008 04:43:14 +0200
Use this enhanced design tele stock to easily convert Your AR-15 or fixed stock CAR-15 Rifle To true M4 or CAR-15 dimensions. This unbreakable, collapsible butt stock instantly makes the AR-15 / M16 lighter, shorter, compact and easier to carry. The sling swivel can be offset to either left or right.
Latch hardware and sling swivel are included. Mounting hardware sold separately. Available in black only. This kit incluldes a 6 position commerical dimension extension tube, castle nut and rreceiver end plate. Sat, 26 Jul 2008 04:43:14 +0200
Smith & Wesson M.A.G.I.C. Knife - partially serrated edge
tanto blade with a black Teflon coating. A very well built knife that powerfully snaps open! Opens easily with the thumbstud or black button on top. The aluminum handles have a nice feel in hand.
Features:
Sat, 26 Jul 2008 04:43:14 +0200
Smith and Wesson SORT Knife, Black Aluminum Handle, Black Blade, Combo Edge
Smith & Wesson makes very good knives at very good prices. The S.O.R.T series--Special Operations Rescue Team--features high quality materials, great craftsmanship, and sophisticated designs. This model in particular has excellent fit and finish, and a super fast assisted opening mechanism. The safety protects you from accidentally opening the knife in your pocket. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The Streamlight Super Tac LED flashlight is an extremely high performance CR123A Lithium battery-powered flashlight. This light features the latest in LED technology for extreme brightness and long range illumination combined with a push button momentary or constant on tail cap switch for one handed operation.
Streamlight introduces a whole new kind of LED. With a brighter, more powerful, blinding light than any LED thats come before. The new Streamlight-engineered reflector with C4 Photonic Crystal technology almost triples the brightness and creates an intense beam that pierces the darkness. So you get the long-run times and indestructibility of an LED with a new level of brightness that leaves other LEDs in the dark. Specifications:
Sat, 26 Jul 2008 04:43:14 +0200
Click here for information when ordering a firearm.
Factory New & unfired Mossberg 500 TACTICAL Persuader/Cruiser 6-SHOT pump-action shotgun in 12 ga. Sat, 26 Jul 2008 04:43:14 +0200
Glock's knives are made of a special hardened steel with polymer handles and black anti-corrosive coated blades for maximum durability and ruggedness. Knives come with matching sheaths made of high-impact resistant polymer materials and feature a loop catch, which allows for quick drawing with only one hand. They fit belts up to 2.4 inches (60mm) in width. These knives are used by special forces around the world and are perfectly balanced for throwing. The handle is made of a high-strength polymer (of course) and the backbone of the blade features a wicked saw-style blade that looks like it will cut through just about anything.
Sat, 26 Jul 2008 04:43:14 +0200
Glock's knives are made of a special hardened steel with polymer handles and black anti-corrosive coated blades for maximum durability and ruggedness. Knives come with matching sheaths made of high-impact resistant polymer materials and feature a loop catch, which allows for quick drawing with only one hand. They fit belts up to 2.4 inches (60mm) in width. These knives are used by special forces around the world and are perfectly balanced for throwing.
Sat, 26 Jul 2008 04:43:14 +0200
NTOA (National Tactical Officers Association) tested and recommended.
Six position AR-15 / M4 Collapsible Butt Stock with rubber non-slip recoil pad and skeletonized design feature a Picatinny rail and storage compartment for 4 CR123 batteries (not included) or other small items. Ambidextrous design is easily achieved by switching the battery compartment lid and Picatinny rail. Two ultrasonically welded metal inserts allow for the addition of optional quick release sling adaptors (PBSS). Batteries are not included. Sat, 26 Jul 2008 04:43:14 +0200
The patented TacStar Hunter SideSaddle mounts 4 extra rounds on your shotgun in a convenient and accessible location for fast reloading. The Hytrel polymer shell carrier is attached to an aluminum mounting plate that installs directly on the shotgun receiver. All mounting screws are included, no gunsmithing required. Installation is easy, and in most cases requires no alterations to the shotgun. Note: some field grade shotguns may require a modification to the shotguns forend. Shotguns using the TacStar pistol grip forend do not require modification.
This side saddle will fit the Remington 870, 1100 and 1187. Sat, 26 Jul 2008 04:43:14 +0200
Each Midwest Industries Snap Hook Style Front Sling Adpater is precision CNC-machined for proper fit and fast easy sling hookup. Steel cross-bolt(s) locks the clamping block tight to eliminate slippage. Adapts virtually any sling to any AR-15 configuration. The Snap Hook Stylle Frotn Sling Adapter has a fixed, round, 5/16 inch (7.8mm) ID loop for clip-on, H&K-style or similar quick-release slings
Features:
Sat, 26 Jul 2008 04:43:14 +0200
Click here for information when ordering a firearm.
The Bushmaster A3 Target Rifle has become the standard for many military forces and Law Enforcement agencies throughout the world. The rifles light weight, accuracy, high capacity, and ease of maintenance all contribute to its wide global acceptance. Features of this durable semi-automatic rifle include hard chrome lining in both bore and chamber. This chrome lining, was developed because powder residue and copper fouling do not adhere as strongly to chrome as they do to plain barrel steel. Additionally, chromes lubricity increases muzzle velocity, and eases chambering and extraction. These factors can double the effective barrel life if regular maintenance procedures are observed. The barrel incorporates a birdcage style flash suppressor with closed bottom which compensates for muzzle climb and reduces dust signature when firing from the prone position. The barrel, and all critical steel components of the rifle, are manganese phosphate coated for protection against corrosion and rust. With the A3 Target Rifle, the Carry Handle is removable to allow easy mounting of a wide variety of scopes, red dot or holographic sights, or night vision equipment. The rear sight used in the Removable Carry Handle is range adjustable from 300 to 600 meters (1/2 MOA for both elevation and windage). Iron sight zero is repeatable when the handle is reattached by means of its knurled knobs. The Upper and Lower Receivers are precision machined from 7075T6 aircraft quality aluminum forgings for maximum strength. The Upper Receiver includes a forward assist device and an integral cartridge case deflector. The Lower Receiver controls include bolt catch assembly; magazine release button, and safety selector with indicator markings on both left and right sides. The ribbed front handguards - molded of polymer thermoset composite - offer increased control and heat dissipation. The pistol grip and buttstock are also molded of thermoset composite, and the buttstock features a storage compartment for small parts or cleaning gear. The Bushmaster A3 Target Rifle is shipped complete with 30 round magazine, safety and operational manual, and carrying sling in a lockable hard case. The Bushmaster A3 Target Rifle also includes a Removable Carry Handle. Features: Finish: Black matte Receiver: Forward Assist Brass Deflector Sights: A2 Sights on removeable carry handle Barrel Length: 20 inches [50.8 cm] Overall Length: 39.5 inches [100.3 cm] Weight: 8.78 lbs. [3.98 kg] Muzzlebreak: Flash Suppressor Packaging: Black Hard Case Additional Features: 1 inch wide Black Sling, Black Thermaplastic Pistol Grip, Bayonet Lug Sat, 26 Jul 2008 04:43:14 +0200
The Wiley-X PT-1 sunglasses offer virtually unbreakable Triloid nylon frames that will keep you focused on your task. Designed to cut wind and debris, the circular frame design provides ultimate peripheral vision and reduces backlit glare. This is a very popular model among the troops protecting our great nation. Meets ANSI Z87.1-2003 high velocity safety as well as the military's stringent Vo Ballistic Standard, MIL-PRF-31013.
The Wiley X PT-1 offers a virtually unbreakable Triloid nylon frame that allows the user to easily change specific lens tints for various light conditions. The Circular frame design surrounds the frontal lobe, providing incredible peripheral vision and backlit glare reduction. The custom nose pad is constructed from a soft, clear, neoprene rubber compound that can be adjusted to accommodate any size nose bridge and set the level of the frame on the face. The ear tips are made from a rubber compound, designed to grip better as your body temperature rises. Includes: smoke, clear and light rust lenses and soft side case. Sat, 26 Jul 2008 04:43:14 +0200
Wiley-X Airborne Sunglasses are great looking sunglasses with superior protection from debris and wind from every angle. The designer styled Wiley X Airborne literally seal the eyes from outside elements during cycling, hiking, fishing, sailing or chilling.
The Wiley-X Logo stands for quality and Wiley-X Airborne Sun Glasses are designed for a perfect fit and long-lasting comfort. The Wiley-X Climate Control Series features a removable, durable facial cavity seal that locks onto lightweight ANSI certified frames. Excellent for sufferers of dry eye syndrome or anyone who's had LASIK or laser surgery. Wiley-X lenses block 100% of the sun's harmful ultraviolet rays (up to 400 nanometers) and far exceed ANSI Z87.1 safety and ANSI Z80.3 optical standards. Cactus Tactical is an authorized distributor of genuine Wiley-X Sunglasses, Wiley X Rx Prescription Eyewear and Wiley X Goggles. Our WileyX Airborne Sunglasses are brand new and come with the full Wiley-X Warranty. We have the best deal on Wiley X Goggles & Sunglasses for U.S. Military (NSN) and Wiley X Nascar Sunglasses and Goggles. Go ahead. Get out. Challenge the world outdoors. Whatever your pursuit, whether you're working hard, playing even harder, or just hanging out, Wiley X Airborne Glasses keep your eyes protected without sacrificing good looks! Wiley X Airborne Sun Glasses Features:
Sat, 26 Jul 2008 04:43:14 +0200
The Blackhawk Universal Sling Adapter has a totally streamlined design, eliminating the ears that stick out of all the other connectors available. The attachment point is perfectly centered, and is designed to make your rifle hang properly for an immediate re-grip when needed.
Completely ambidextrous, no more left or right versions. Interference with your seletor switch / safety operation is completely gone with this new design. Made of steel right here in the USA. Accepts MASH hooks (preferred), Z/M style clasps, and HK hooks. Features:
Sat, 26 Jul 2008 04:43:14 +0200
DPMS Panther Arms 5.56 NATO Sportical
Barrel: Chamber: Method of Operation: Bolt & Carrier: Sights: Weight: Length: Stock: Handguards: Each Rifle comes with 2 - 30 round magazines, 1 Nylon Web Sling, and 1 Cleaning Kit. The optic displayed in the image is for illustrative purposes only and not included with the DPMS Sportical. Due to Federal firearms regulations, a Form 4473 or transfer to a receiving FFL is required for the purchase of this receiver. If you are unsure of the procedure, please click here for more information. Sat, 26 Jul 2008 04:43:14 +0200
DPMS Panther Arms Forged Lower Receiver Assembly
The DPMS Lower Receiver is forged from T6 Aircraft Aluminum Alloy and has a hardcoat anodized finish. Assembled AR-15 lower includes a mil-spec A2 buttstock assembly and an A2 pistol grip. Description
Due to Federal firearms regulations, a Form 4473 or transfer to a receiving FFL is required for the purchase of this receiver. If you are unsure of the procedure, please click here for more information. Sat, 26 Jul 2008 04:43:14 +0200
NTOA (National Tactical Officers Association) tested and recommended.
Six position AR-15 / M4 Collapsible Butt Stock with rubber non-slip recoil pad and skeletonized design feature a Picatinny rail and storage compartment for CR123 batteries (4 total) or other small items. Ambidextrous design is easily achieved by switching the battery compartment lid and Picatinny rail. Two ultrasonically welded metal inserts allow for the addition of optional quick release sling adaptors (PBSS). Includes buffer tube, buffer spring, buffer assembly, castle nut, and collar. Sat, 26 Jul 2008 04:43:14 +0200
Click here for information when ordering a firearm.
Ruger 10/22 rifles are ideally suited for informal target shooting, plinking, small game hunting, and action-shooting events. The benefits of the Ruger 10/22 are many. The standard 10/22 Carbine, virtually unchanged since introduced in 1964, is the most popular .22 rifle of the last 40 years. Features:
Sat, 26 Jul 2008 04:43:14 +0200
This is the most versatile riser block we make. .500 inch high and including an extended rail allows a wide range of options. This mount also features a see through hole and 4 Stanag mounting holes for the ultimate in mount option.
Laser engraved V-Tac series. Product Data:
Sat, 26 Jul 2008 04:43:14 +0200
This .250 inch riser block extends out over the handguard offering more mounting options for longer optics.
Laser engraved V-Tac series. Product Data:
Sat, 26 Jul 2008 04:43:14 +0200
This aluminum base and Stanag ring set is made to NATO specs and is a superb platform to mount any scope. It mounts to any existing picatinny 1913 rail, and you can buy additional ringsets to change scope tube diameters while still utilizing one base.
Currently available with 30 and 35 MM ring sets. Product Data:
Sat, 26 Jul 2008 04:43:14 +0200
The Six Pack Magazine Pouch from Galati International holds six 45 Auto magazines, Browning Hi-Power magazines or four double stacked magazines. It has double belt loops for attachment to a belt. Separate Velcro closures are on each of the four pockets.
Constructed from PVC Tactical Nylon for superior quality. Overall Length: 12 1/4 inches x 6 1/4 inches. 100% Guaranteed with a 2 Year Warranty through Galati International. Sat, 26 Jul 2008 04:43:14 +0200
STRIKE SNIPER REST
Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Carbon Fiber Composite holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. The textured Carbon Fiber Composite is enhanced by a Carbon-Fiber finish appliqué that gives this holster a cutting edge appearance like no other. The design of the holster aids in concealment with its cut-down body and tapered trailing edge. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Carbon Fiber Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Carbon Fiber Composite holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. The textured Carbon Fiber Composite is enhanced by a Carbon-Fiber finish appliqué that gives this holster a cutting edge appearance like no other. The design of the holster aids in concealment with its cut-down body and tapered trailing edge. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Carbon Fiber Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Carbon Fiber Composite holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. The textured Carbon Fiber Composite is enhanced by a Carbon-Fiber finish appliqué that gives this holster a cutting edge appearance like no other. The design of the holster aids in concealment with its cut-down body and tapered trailing edge. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Carbon Fiber Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Carbon Fiber Composite holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. The textured Carbon Fiber Composite is enhanced by a Carbon-Fiber finish appliqué that gives this holster a cutting edge appearance like no other. The design of the holster aids in concealment with its cut-down body and tapered trailing edge. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Carbon Fiber Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Carbon Fiber Composite holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. The textured Carbon Fiber Composite is enhanced by a Carbon-Fiber finish appliqué that gives this holster a cutting edge appearance like no other. The design of the holster aids in concealment with its cut-down body and tapered trailing edge. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Carbon Fiber Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Carbon Fiber Composite holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. The textured Carbon Fiber Composite is enhanced by a Carbon-Fiber finish appliqué that gives this holster a cutting edge appearance like no other. The design of the holster aids in concealment with its cut-down body and tapered trailing edge. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Carbon Fiber Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Carbon Fiber Composite holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. The textured Carbon Fiber Composite is enhanced by a Carbon-Fiber finish appliqué that gives this holster a cutting edge appearance like no other. The design of the holster aids in concealment with its cut-down body and tapered trailing edge. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Carbon Fiber Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Carbon Fiber Composite holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. The textured Carbon Fiber Composite is enhanced by a Carbon-Fiber finish appliqué that gives this holster a cutting edge appearance like no other. The design of the holster aids in concealment with its cut-down body and tapered trailing edge. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Carbon Fiber Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
The amazing new Blackhawk CQC Carbon Fiber Composite holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.
The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon. The textured Carbon Fiber Composite is enhanced by a Carbon-Fiber finish appliqué that gives this holster a cutting edge appearance like no other. The design of the holster aids in concealment with its cut-down body and tapered trailing edge. Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day. All BlackHawk CQC Carbon Fiber Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits. Features:
Sat, 26 Jul 2008 04:43:14 +0200
Hogue Shotgun Stocks are molded from a super tough fiberglass reinforced polymer, assuring stability and accuracy. These superior stocks are durable, weatherproof and non-slip. Hogue Shotgun stocks are super comfortable with a standard length of pull. The grip of the stock and the entire forend are OverMolded with soft rubber texturing for outstanding shotgun handling characteristics.
Sat, 26 Jul 2008 04:43:14 +0200
The finest recoil reducing stock on the Planet!
From the longest arm of the law to the shortest, the Knoxx SpecOps Stock is instantly adjustable to fit any shooter. With over 4 inches of adjustment, this is a stock that the entire department can use comfortably in any application and with any load. Just when you thought recoil reduction had reached maximum potential, Knoxx Industries has produced yet another patented recoil-reducing stock to revolutionize the way you think about shotguns. Utilizing dual Knoxx recoil-compensating systems, the SpecOps Stock has the ability to reduce felt recoil of even the most potent loads by up to 95%. The SpecOps Stock makes even the heaviest loads easy for all shooters to handle! The SpecOps polymer and alloy construction makes it durable, reliable and built to last. Also, the unique features and design of this pistol grip style stock allows law enforcement agencies and military personnel the ability to use their shotguns with all load-bearing and ballistic tactical vests. Designed to fit any and all shooters, and practically devoid of recoil, the Knoxx SpecOps Stock is the latest in the Knoxx family of recoil-reducing products. Not only is it utilizing two recoil-absorbing mechanisms to soak up recoil, it also adjusts to fit any shooter regardless of the situation or application. Hunters and competitive shooters will find their scores and hit ratios improving as flinching and recoil anticipation dramatically decreases. Unique Features Include: Advantages: Sat, 26 Jul 2008 04:43:14 +0200
Commerical style M4 6 position, extendable stock lets you select the length of pull best suited to your shooting needs. Requires no alterations, Includes commercial width buffer tube, receiver lock plate, castle lock nut, rear sling swivel, recoil spring and buffer.
Package Includes:
Sat, 26 Jul 2008 04:43:14 +0200
The new series of GG&&G Receiver End Plate Sling Adapters can also be used to attach a conventional sling in conjunction with the front sling swivel. A significant advantage of this set up is that expanding or collapsing the buttstock does not affect the sling length. If you wear body armor, a tactical vest or a jacket, you no longer need to re-adjust the sling length due to the extra apparel.
GG&G offers two Receiver End Plate Sling Adapters. Both are designed for professional use being machined from 4140 ordnance steel. They are manganese phosphated black, and can easily be installed by the operator. One of the Receiver End Plate Sling Adapters has a rectangular sling slot that will accept sling webbing up to 1 1/4" wide, such as the Specter Gear Single Point Tactical Sling. The other sling attachment features ambidextrous mounting rings for attaching spring-loaded clips like those found on the Chalker Tactical Sling or the Heckler & Koch combat-carry-type slings. The rectangular end plate adapter is available in ambidetrous, right and left handed versions. Sat, 26 Jul 2008 04:43:14 +0200
Click here for information when ordering a firearm.
Everyone loves a DPMS Panther Arms rifle. The DPMS Panther LR-308T features a 16 inch heavy barrel and a ribbed aluminum free float forearm. DPMS Panther Arms LR-308T specifications: Barrel: Weight: Length: Sat, 26 Jul 2008 04:43:14 +0200
DPMS Panther Arms A-15 AR15 Stripped Forged Lower Receiver
This Stripped Lower Receiver is forged from T6 Aircraft Aluminum Alloy and has a hardcoat anodized finish. Does not include any internal or external parts. Receiver uses current standard .250 inch pivot pin and a small pin .154 inch trigger. Due to Federal firearms regulations, a Form 4473 or transfer to a receiving FFL is required for the purchase of this receiver. If you are unsure of the procedure, please click here for more information. Sat, 26 Jul 2008 04:43:14 +0200
The Glock 17 in caliber 9x19 is the most
widely used law enforcement pistol worldwide.
Because of its unsurpassed reliability,
above-average magazine capacity of 17 cartridges
in the standard magazine and its low weight, it is
trusted by law enforcement officers in their daily
duties throughout the world. It is safe, easy and
quick to use through the revolutionary Safe Action
trigger system. GLOCK 17, designed for professionals.
Sat, 26 Jul 2008 04:43:14 +0200
Glocks new version of the 45 ACP 21 with the Slim Frame, Ambidextrous Safety and Picatinny Rail.
The Glock 21SF has 3 exterior design changes as compared to the Glock 21. The first is the ambidextrous magazine release. Glock also redesigned their magazines to address the differences in the original G21 and the G21SF. The new magazines will function in both designs, but the old magazines don't have the necessary cut out in the front of the magazines to funciton in the new weapon. The magazine capacity didn't change: you still get 13 rounds of .45ACP in the mag plus one more in your chamber. The second design modification is the reduced size of the grip frame. This is something that needs to be felt to appreciate. The dead space behind the magazine well is much smaller on the G21SF than it is on the G21. There is also a noticeable difference in the thickness of the grip frame on either side of the mag well. The third design modification is the inclusion of a full milspec 1913 Picatinny rail system on the dust cover.
Sat, 26 Jul 2008 04:43:14 +0200
The new GG&G Mult Use Sling Adapter For AR-15 / M4 collapsible stocks will accept up to 1 1/4 inch webbing for traditional sling attachments, and has a special annular feature that allows those slings with HK style snap hooks to be used without having to change out the receiver end plate sling adapter. This innovative adapter not only allows the use of two different attachment methods, but also allows for the use of single point slings and the attachment of a conventional sling in conjunction with the front sling swivel.
As with all GG&G Receiver End Plate Sling Adapters, this one is designed for professional use being machined at their facility from AS-35 Geneva steel. Of exceptionally high quality, this famous Swiss steel features molecular structure with elongated grains for added toughness. It has a manganese phosphate matte black finish per mil-spec. Sat, 26 Jul 2008 04:43:14 +0200
The Devtron Scopecoat is constructed of high quality 2mm thick neoprene laminated with nylon. Its simple design safeguards any kind of scope from dings and scratches, dust, dirt and moisture. Neoprene has a 5% moisture absorbency, which takes moisture away from the scope and helps protect it from rust and corrosion. Scopecoat is a proven design that has been field tested and recommended by the North American Hunting Club. Scopecoats are proudly made in America.
Fits the Trijicon TA-11. Sat, 26 Jul 2008 04:43:14 +0200
The Devtron Scopecoat is constructed of high quality 2mm thick neoprene laminated with nylon. Its simple design safeguards any kind of scope from dings and scratches, dust, dirt and moisture. Neoprene has a 5% moisture absorbency, which takes moisture away from the scope and helps protect it from rust and corrosion. Scopecoat is a proven design that has been field tested and recommended by the North American Hunting Club. Scopecoats are proudly made in America.
Fits the Trijicon TA-01NSN. Sat, 26 Jul 2008 04:43:14 +0200
The Devtron Scopecoat is constructed of high quality 2mm thick neoprene laminated with nylon. Its simple design safeguards any kind of scope from dings and scratches, dust, dirt and moisture. Neoprene has a 5% moisture absorbency, which takes moisture away from the scope and helps protect it from rust and corrosion. Scopecoat is a proven design that has been field tested and recommended by the North American Hunting Club. Scopecoats are proudly made in America.
Fits the Trijicon TA-01. Sat, 26 Jul 2008 04:43:14 +0200
The Devtron Scopecoat is constructed of high quality 2mm thick neoprene laminated with nylon. Its simple design safeguards any kind of scope from dings and scratches, dust, dirt and moisture. Neoprene has a 5% moisture absorbency, which takes moisture away from the scope and helps protect it from rust and corrosion. Scopecoat is a proven design that has been field tested and recommended by the North American Hunting Club. Scopecoats are proudly made in America.
Fits the Eo Tech 552. Sat, 26 Jul 2008 04:43:14 +0200
The Devtron Scopecoat is constructed of high quality 2mm thick neoprene laminated with nylon. Its simple design safeguards any kind of scope from dings and scratches, dust, dirt and moisture. Neoprene has a 5% moisture absorbency, which takes moisture away from the scope and helps protect it from rust and corrosion. Scopecoat is a proven design that has been field tested and recommended by the North American Hunting Club. Scopecoats are proudly made in America.
Fits the Eo Tech 511. Sat, 26 Jul 2008 04:43:14 +0200
The Devtron Scopecoat is constructed of high quality 2mm thick neoprene laminated with nylon. Its simple design safeguards any kind of scope from dings and scratches, dust, dirt and moisture. Neoprene has a 5% moisture absorbency, which takes moisture away from the scope and helps protect it from rust and corrosion. Scopecoat is a proven design that has been field tested and recommended by the North American Hunting Club. Scopecoats are proudly made in America.
Fits the Aimpoint Comp M2 and M3. Sat, 26 Jul 2008 04:43:14 +0200
Click here for information when ordering a firearm.
STG-556 Innovative Advanced Bullpup Sporting Rifle Design The STG-556 Sporting Model rifle is a gas operated semi-automatic bull pup rifle featuring a quick interchangeable barrel available in various lengths. The STG-556 innovative design features include a Forward Assist and Last Round Bolt Hold Open Release; something never before seen in a rifle of this distinction. This state-of-the-art design and platform has been totally re-engineered to bring you absolute function and reliability... Making a 30 year battle proven design bar none above all others. This ambitious firearm is brought to you by Microtech Small Arms Research, a contemporary sister company to Microtech Knives, Inc., acknowledged world leader in specialty cutlery.
Sat, 26 Jul 2008 04:43:14 +0200
Keep your tactical gear within easy reach and your hands free at the same time. These deluxe tactical vests are engineered to efficiently organize all your tactical gear and accessories.
The Galati Deluxe Tactical Vest includes a universal holster, pistol web belt, 3 universal pistol mag/flashlight pouches, radio pouch, sniper shoulder, large ID pouch, 4 adjustable rifle mag pouches, 2 internal zippered map/document pouches, and a heavy duty back loop system to carry additional gear and tools. The vest is fully adjustable in girth and length. High quality zippers. LARGE VEST:
Sat, 26 Jul 2008 04:43:14 +0200
After more than two years of research, development, and prototyping, SPEEDFEED has produced the best tactical shotgun stock / forearm ever! The pistol grip design now allows true one-hand control. Combined with the in stock magazine, the SPEEDFEED III Tactical Stock is the most versatile stock on the market today. Tthe SPEEDFEED I stock has two magazine tubes (storing a total of four rounds) molded into the stock. Each magazine tube (holding two shells) exits just behind the pistol grip, one on each side of the stock. A steel spring in each tube holds the rounds in the magazine until they're needed and then with a flick of the finger, shells are instantly available for loading. The set includes forend and recoil pad.
Speedfeed Part # 0250 - fits 12 gauge Remington 870 shotgun. Sat, 26 Jul 2008 04:43:14 +0200
Designed for Law Enforcement and Ideal for Sportsmen, the SPEEDFEED I stock has two magazine tubes (storing a total of four rounds) molded into the stock. Each magazine tube (holding two shells) exits just behind the pistol grip, one on each side of the stock. A steel spring in each tube holds the rounds in the magazine until they're needed and then with a flick of the finger, shells are instantly available for loading.
Speedfeed Part # 0115 - fits 12 gauge 500 / 590(long action only) Sat, 26 Jul 2008 04:43:14 +0200
Designed for Law Enforcement and Ideal for Sportsmen, the SPEEDFEED I stock has two magazine tubes (storing a total of four rounds) molded into the stock. Each magazine tube (holding two shells) exits just behind the pistol grip, one on each side of the stock. A steel spring in each tube holds the rounds in the magazine until they're needed and then with a flick of the finger, shells are instantly available for loading.
Speedfeed Part # 0100 - fits 12 gauge Remington 870 shotgun. Sat, 26 Jul 2008 04:43:14 +0200
The Lancer L5 is a translucent 30 round magazine developed for the 5.56mm M16/M4/AR15 rifle. It has an impact resistant translucent polymer body, corrosion resistant steel feed lips and a removable, patent pending, rubber coated bottom. The L5 was designed to be used with the existing magazine pouches and carriers.
Features:
Sat, 26 Jul 2008 04:43:14 +0200
The Sabre Red JOGGER is the top deterrant for long jogging or running around the city or wooded rural areas. The JOGGER has an adjustable hand strap lending accessibility and easy carrying in the palm. The small, yet powerful .75 oz Jogger Unit delivers approximately 35 shots. The JOGGER provides an 8-10 foot ballistics stream delivery which decreases wind blow-back.
Ingredients: 10% Oleoresin Capsicum, 13.3% Capsaicin and UV dye - 2,000,000 SHU. Sabre Red pepper sprays combines the powerful inflammatory effect of Red Pepper and CS Military Tear Gas with an invisible ultraviolet dye to aid in suspect identification. Sat, 26 Jul 2008 04:43:14 +0200
The Blade Tech Millenium series of double magazine pouches are made from a specially formulated polymer made specfically for this type of injection molding. Stronger and more heat resistant than standard sheet kydex material.
Available with the innovative SR (Stingray) belt attachment which includes an adjustable shim. This attachment allows the pouch to be carried closer to the body for ease in concealment. *These magazine pouches are ambidextrious and for use by both left and right handed individuals. Sat, 26 Jul 2008 04:43:14 +0200
Everyone should have one of these kits in your range bag or gun case for emergencies
Kit Includes: Takedown Pin, Selector Detent, Front Pivot Pin, Takedown Detents, Rear Base Spring Pin, Bolt Catch Roll Pin, Trigger Guard Pin, Extractor Pin, Ejector Roll Pin, Gas Tube Roll Pin, Rear Base Spring Pin, Forward Assist Pin, Trigger Pin, Hammer Pin and Firing Pin Retaining Pin. Sat, 26 Jul 2008 04:43:14 +0200
NEW for 2008! Blade-Tech Revolution Series Holster!
Blade-Tech have created a new product line: the Revolution Series line of holsters. Using a proprietary blend of polymers, Blade-Tech has engineered these holsters to offer lifetime performance in a wide range of conditions. The holsters will not become soft in extreme temperatures (over 300 degrees F) and will not become fragile in low temperatures. Holsters come with the stingray belt-loop (adjustable for a 1 inch to 2 1/4 inch belt). Made in the USA. Fits the Glock 20 / 21 / 21SF. Sat, 26 Jul 2008 04:43:14 +0200
Harris bipods clamp to most Q.D. stud equipped bolt action rifles, and have a sling attachment provision. Spring-loaded folding legs are quickly adjustable for height. Manufactured with heat treated steel and hard alloys, bipods have a black anodized finish.
Features:
Sat, 26 Jul 2008 04:43:14 +0200
19 Round Steel Magazine for the DPMS .308AR-15 style rifle.
These 19 round steel magazines for the DPMS Panther Long Range Rifles (.308, .260, .243) answer the customer's demand for durable and dependable magazines. Made of heat-treated 1050 steel with a manganese phosphated finish, these steel magazines will withstand the rigors of the hunt. A steel floor plate, spring and follower complete these tough and durable magazines from DPMS. Additionally, these magazines will fit in the Knight's Armament Company SR-25. If you are unclear about the legality of buying high capacity magazines in your city or state, please click here for the current state and local restrictions. It is the buyers responsiblity to be aware and accountable for any purchase which could violate a local or state law.
Sat, 26 Jul 2008 04:43:14 +0200
The HOGUE HANDALL is a universal rubber grip sleeve with finger grooves and palm swells that fits most small semi auto pistols.
The small Handall grip is known to properly fit the following guns:
Sat, 26 Jul 2008 04:43:14 +0200
The HOGUE HANDALL is a universal rubber grip sleeve with finger grooves and palm swells that fits most large and medium size semi auto pistols.
The large Handall grip is known to properly fit the following guns:
Sat, 26 Jul 2008 04:43:14 +0200
Without a doubt the Trijicon ACOG 4X32 series scopes, are some of the most rugged and dependable scopes available. However they are missing a very important component-Lens Covers. The GG&G New Product Development Team decided it was time to provide customers with a method to not only mount the scope, but provide a method to protect the lenses of this expensive optic.
Thise package includes the GG&G Accucam ACOG Quick Detach Mount with an integral front lens cover adapter, the rear lens cover adapter, and a set of custom Buttler Creek lens covers that provide weatherproof, dust proof and moisture proof protection for the ACOG lenses. The lens covers included with this kit will fit the TAO1, TA31, TA31F and TA31RCO series of scopes. Although the design and methodology is so unique that a patent is pending, the system is easy to install. The Accucam ACOG Quick Detach Mount provides you with a solid method to quickly install or remove the scope from the weapon. The scope can quickly be installed on a dovetail rail in seconds by rotating the Accucam Lever to the locked position and can just as quickly be removed by rotating the Accucam Cam Lever to the unlocked position. Unlike other QD lever systems, it is fully adjustable to fit Weaver and MIL-STD-1913 dovetails, even those that are worn or out-of-spec. The ergonomic finger loop of the lever is easily operated, even with a gloved hand, and the round design is virtually snag proof. The Accucam mechanism is manufactured from solid billet 4140 steel and manganese phosphated matte black per mil-spec. Sat, 26 Jul 2008 04:43:14 +0200
Fits all AR15/M16 rifles with original grips. The ERGO Sure Grip features:
Grip Kit includes one ERGO Sure Grip, One ERGO Grip Plug and one Gapper. Sat, 26 Jul 2008 04:43:14 +0200
As the use of tactical forearms, such as the full line of GG&G Modular Tactical Forearms have become more prevalent by special operations personnel and law enforcement SWAT teams, the need to easily mount a sling to the dovetail rails of the tactical forearm has become necessary. It was for this reason that GG&G developed a Sling Thing specifically for dovetail applications. We have been advised by our tactical advisors that there are mission requirements that require the sling to be quickly detached from the weapon.
In response to that need GG&G have developed the Quick Detach Sling Thing For Dovetails. This Sling Thing provides the flexibility of quickly detaching the sling by the use of a rugged 1 1/4 in QD sling swivel which is included in the package. When coupled with the GG&G QD Rear Sling Thing, the sling can be quickly removed from the weapon. The GG&G Quick Detach Sling Thing For Dovetails provides the flexibility to mount the front sling attachment anywhere on the tactical forearm rails that meet the mission requirement. As with all of the Sling Things, this latest addition to the product line provides a lightweight, durable, easy-to-install and inexpensive method for front sling attachment. It is manufactured from tough 7075 billet aluminum, alloy and is Type III black hard-coat anodized per mil-spec. Sat, 26 Jul 2008 04:43:14 +0200
The Magpul PMAG Ranger is a floorplate replacement for 20 and 30 round PMAGs that incorporates an integral loop similar to the original USGI Magpul Ranger Floor Plate. When installed on the base of a magazine, the PMAG Ranger Plate provides unsurpassed speed and controllability during high stress, tactical magazine changes.
Available in 3-packs. Sat, 26 Jul 2008 04:43:14 +0200
- New in Box Smith and Wesson M&P 45ACP 4.5" 10rd Black Pistol - #109106 -
You are bidding on a new Smith and Wesson M&P 45ACP 4.5" Black Pistol, manufacturers #109106. In creating the M&P, Smith & Wesson considered the needs of military and law enforcement from every conceivable angle. No other polymer pistol offers this combination of versatility, durability and safety. Sat, 26 Jul 2008 04:43:14 +0200 </ |
All rss from this site
Print this article
Webmasters ! Get this feed on your site